CMSSM Logo
×

Stelios Kyriakides

Professor, Center Director, John Webb Jennings Chair in Engineering

|

|

|

Email: skk@mail.utexas.edu
Phone: (512) 471-4167
Office: ASE 5.230 (map)

John Webb Jennings Chair in Engineering

Professor of Aerospace Engineering and Engineering Mechanics

Director of the Center for Mechanics of Solids, Structures and Materials

Dr. Kyriakides received a B.Sc. degree in Aeronautical Engineering with first class honors from the University of Bristol in the U.K., and M.S. and Ph.D. degrees in Aeronautics, with specialty in the mechanics of solids, from the California Institute of Technology. He is Professor of Aerospace Engineering and Engineering Mechanics at The University of Texas at Austin and holds the John Webb Jennings Chair in Engineering. Kyriakides' major technical interests are in the mechanics of solids, structures and materials, with an emphasis on instability at both the macro (structural) and micro (material) levels. His work is motivated by practical problems and usually involves combined experimental, analytical and numerical efforts. He has more than 200 publications, has co-authored one book, co-edited 5 books, and has lectured extensively both nationally and internationally. Among other research contributions, he has pioneered propagating instabilities in structures and materials. The subject first appeared in the problem of buckle propagation in offshore pipelines in the 1980s, but the underlying mechanism of localization of deformation, local arrest, and propagation was subsequently demonstrated to govern other structures and a variety of material systems, including: propagating necks in polymers; the onset and spreading of crushing in cellular materials including trabecular bone; the propagation of kink bands in fiber composites and woods; the propagation of phase transition fronts in shape memory alloys; the propagation of Lüders bands in metals, and others. He has also maintained a long-term interest in plastic instabilities and crushing of structures, plasticity, forming problems in manufacturing, localization and ductile failure of metals, the mechanical behavior of composites, etc. He is recognized as a major contributor to these areas.

Dr. Kyriakides has also been one of the pioneers in the development of the technology for offshore oil and gas exploration and production. In particular, he has been a leader in the understanding of the mechanical behavior and establishment of the limit states of tubular structures used as pipelines, risers, tethers, and casings, in deep waters. His research has influenced the manufacture of tubular products, the design procedures for installing them in the sea, and evaluation of their performance of the structures under the operational loads. The results of his research play a prominent role in pipeline design codes and have made him a major technical advisor to the offshore industry worldwide. Part of this body of work has been summarized in a book entitled "Mechanics of Offshore Pipelines: Vol. 1 Buckling and Collapse," (Elsevier, 2007), with additional volumes to follow.

Dr. Kyriakides is proud of the quality graduate students he has attracted to the University of Texas and mentored to excellence. His doctoral students occupy both academic positions as well as prominent positions in a variety of industries. His M.S. advisees can be found in companies such as Boeing, Lockheed Martin, Northrop, ExxonMobil, Shell, Applied Materials, Stress Engineering, Schlumberger, Technip, Carbomedics, Sandia National Labs, Lucent Technologies, Aerospatiale, and others.

He has served the community in several roles including: member and Chair of the Executive Committee of the Applied Mechanics Division-ASME; President of the American Academy of Mechanics (AAM); member and Chair of the US National Committee of Theoretical and Applied Mechanics; member of the Congress Committee and the General Assembly of the International Union of Theoretical and Applied Mechanics (IUTAM); co-organizer of conferences including two IUTAM Symposia. He serves on several editorial boards of international journals and is Editor of the International Journal of Solids and Structures. His recognitions include the 2009 Warner T. Koiter Medal from the American Society of Mechanical Engineers, Member of the US National Academy of Engineering, Fellow of ASME and AAM, Docteur Honoris Causa from the Institut National des Sciences Appliquées de Lyon, France.

Current Graduate Students
- Martin Scales
- Kelin Chen
- Chenglin Yang
- Karlos Kazinakis
- Solon Tsimpoukis
- Jake Haley
- Weihan Zhang

EDUCATION:


Ph.D. Aeronautics (Solid Mechanics), April 1980, California Institute of Technology.
M.S. Aeronautics, June 1976, California Institute of Technology.
B.Sc. First Class Honors, in Aeronautical Engineering, June 1975, University of Bristol, Bristol, U.K.


ACADEMIC POSITIONS:


1996-present Director, Center for Mechanics of Solids, Structures & Materials, UT-Austin
9/89-present Professor, Aerospace Engineering & Engineering Mechanics, UT-Austin.
1-6/1996 Visiting Scholar, Division of Applied Sciences, Harvard University.
1-5/1990 Visiting Scholar, Aeronautics, California Institute of Technology.
9/85-8/89 Assoc. Prof., Aerospace Engineering & Engineering Mechanics, UT-Austin.
9/80-8/85 Assist. Prof., Aerospace Engineering & Engineering Mechanics, UT-Austin.
4/80-8/80 California Institute of Technology. Research Fellow in Aeronautics


HONORS AND AWARDS:


Warner T. Koiter Medal, ASME 2009
Honorary Doctorate (Docteur Honoris Causa), INSA de Lyon (Institut National des Sciences Appliquées de Lyon), Villeurbanne Cedex, France (For more see Ceremony). April 21, 2009.
Mechanics Distinguished Lecturer of Spain 5/2007
John Webb Jennings Chair in Engineering 2/2007-present
Elected Member of the National Academy of Engineering 2/2007
Midwest Mechanics Lecturer 2002-2003
Elected Fellow of the American Academy of Mechanics 1999
Elected Fellow of the American Society of Mechanical Engineers 1997
Temple Foundation Endowed Professorship No. 1 UT-Austin 8/1999-2007
Hayden Head Professorship in Engineering, UT-Austin 8/1996-8/1999
ALCOA Foundation Unrestricted Grant 1994
Walter L. Huber Civil Engineering Research Prize 1992
Engineering Foundation Faculty Excellence Award, UT-Austin 1984, 1992
Outstanding Paper Award, ASME Division of Offshore Mechanics & Arctic Engineering 1991
Department of ASE/EM Excellence in Teaching Award 1989-90
Presidential Young Investigator Award, National Science Foundation 1984-1989
U.T. Engineering Foundation Centennial Teaching Fellowship 1984-1996
Hele-Shaw Prize for Outstanding Academic Performance, University of Bristol, U.K. 1974-1975
British Commonwealth Scholarship for University Tuition 1975-75.


PROFESSIONAL ORGANIZATIONS:

o Member, National Academy of Engineering
o Member, The Academy of Medicine, Engineering and Science of Texas
o Fellow, American Society of Mechanical Engineers
o Member, American Society of Civil Engineers
o Member, Society of Experimental Mechanics
o Fellow, American Academy of Mechanics
o Member of the Structural Stability Research Council
o Member, Society of Engineering Science
o Member, Society of Petroleum Engineers
o Member, American Institute of Aeronautics and Astronautics
o Registered Professional Engineer in the State of Texas (Reg. No. 57771)

EDITORSHIPS AND EDITORIAL BOARDS:

o Editor, International Journal of Solids and Structures, 10/05 - present
o Associate Editor, ASME Journal of Applied Mechanics, 6/94 - 6/2000
o Editorial Board, International Journal of Plasticity, 1/90 - present
o Editorial Board, International Journal of Non-linear Mechanics, 11/95 - 6/05
o Editorial Board, Journal of Composite Materials, 1/01 - present

NATIONAL AND INTERNATIONAL COMMITTEES:

o 2006, President, American Academy of Mechanics
o 2005, President-Elect, American Academy of Mechanics
o September 2, 2004-, Member of the Congress Committee, International Union of Theoretical and Applied Mechanics
o July 1, 2002 - June 20, 2003, Chair, Executive Committee of the Applied Mechanics Division of the ASME
o July 1999 - July 2002, Member Executive Committee of the Applied Mechanics Division of the ASME
o November 1998 - present, Member-at-Large US National Committee on Theoretical and Applied Mechanics (NRC)
o May 2001, Co-chair and organizer of IUTAM Symposium, "Material Instabilities and the Effect of Microstructure," Austin, TX, May 7-11.
o July 1994 - July 2000, Associate Editor, ASME Journal of Applied Mechanics.
o July 1996 - present, ASME, Applied Mechanics Division, Secretary of Technical Committee Instablity in Solids and Structures.
o March 1993- June 1996, ASME, Applied Mechanics Division, Founding Chairman of Technical Committee Instability in Solids and Structures

RESEARCH INTERESTS:

Instability in Solids, Structures and Materials.
Solid Mechanics, Mechanics of Materials, Structural Mechanics

CURRENT PROJECTS:

Compressive Behavior of Fiber Composites
Compressive Response and Crushing of Cellular Materials and Wood
Biomechanics of Skin
Material Characterization in Shape Memory Alloys
On the Dynamics and Arrest of Propagating Instabilities in Structures
Cyclic Plasticity and Cyclic Degradation of Structures
Stability Problems of Deep Water Tubular Structures
Manufacturing: Hydroforming, Cold Forming of Aluminum Extrusions, Forming of Large Diameter Pipes
Mechanics of Offshore Pipelines
Progressive Crushing of Tubular Structures

RECENT PUBLICATIONS:

Books and Monographs:

Kyriakides, S., and Corona, E., Mechanics of Offshore Pipelines: Vol. 1 Buckling and Collapse. Elsevier, Oxford, UK, 2007.

Kyriakides, S., "Propagating Instabilities in Structures." In Advances in Applied Mechanics, Ed. by J.W. Hutchinson and T.Y. Wu, Vol. 30, pp. 67-189, Academic Press, Boston, MA, Oct. 1993.

Journal Papers:

Gaintanaros, S., Kyriakides, S., Kraynik, A.M., "On the Crushing of Polydisperse Foams." European J. Mechanics A/Solids (in press) doi:/10.1016/j.euromechsol.2017.09.010

Liu, Y., Kyriakides, S., "Effects of Geometric and Material Discontinuities on the Reeling of Pipelines." Applied Ocean Research , 65, 238-250, 2017. doi:/10.1016/j.apor.2017.04.006

Jiang, D., Kyriakides, S., Landis, C.M., "Propagation of Phase Transformation Fronts in Pseudoelastic NiTi Tubes under Uniaxial Tension" Extreme Mechanics Letters (in press). 2017. doi:/10.1016/j.eml.2017.06.006

Kyriakides S., "Effects of reeling on pipe structural performance Part I: Experiments." ASME J. Offshore Mech. Arctic Eng. 139:5, 051706, 2017. http://dx.doi.org/ 10.1115/1.4037063

Liu, Y., Kyriakides, S., and Dyau, J.-Y., "Effects of reeling on pipe structural performance Part II: Analysis." ASME J. Offshore Mech. Arctic Eng. 139:5, 051706, 2017. http://dx.doi.org/ 10.1115/1.4037063

Jiang, D., Kyriakides, S., Landis, C.M., "Bending of Pseudoelastic NiTi Tubes." Int’l J. Solids Structures (in press), 2017. http://dx.doi.org/ 10.1115/1.4037063

Jiang, D., Kyriakides, S., Landis, C.M., Kazinakis, K., "Modeling of Propagation of Phase Transformation Fronts in NiTi Under Uniaxial tension." European J. Mechanics A/Solids 64, 131-142, 2017. doi:/10.1016/j.euromechsol.2017.02.004

Scales, Tardif, N., Kyriakides, S., “Ductile Failure of Aluminum Alloy Tubes Under Combined Torsion and Tension.” Int’l J. Solids & Structures 97-98, 116-128, 2016. http://dx.doi.org/10.1016/j.ijsolstr.2016.07.038

Jiang, D., Landis, C.M., Kyriakides, S., "Effects of Tension/Compression Asymmetry on the Buckling and Recovery of NiTi Tubes Under Axial Compression." Int’l J. Solids & Structures 100-101, 41-53, 2016. http://dx.doi.org/10.1016/j.ijsolstr.2016.07.003

Bechle, N.J. and Kyriakides, S., "Evolution of Phase Transformation Fronts and Associated Thermal Effects in a NiTi Tube Under a Biaxial Stress State." Extreme Mech. Letters 8, 55-63, 2016. http://dx.doi.org/10.1016/j.eml.2016.02.018

Bechle, N.J. and Kyriakides, S., “Evolution of Localization in Pseudoelastic NiTi Tubes Under Biaxial Stress States.” Int’l J. Plasticity 82, 1-31, 2016. doi:10.1016/j.ijplas.2016.01.017

Chen, K., Scales, M., Kyriakides, S., Corona, E., "Effects of anisotropy on material hardening and burst in the bulge test." Int’l J. Solids & Structures 82,7-84, 2016.http://dx.doi.org/10.1016/j.ijsolstr.2015.12.012

JJiang, D., Bechle, N.J., Landis, C.M., Kyriakides, S., "Buckling and Recovery of NiTi Tubes Under Axial Compression." Int’l J. Solids & Structures 80, 52-63, 2016. doi:10.1016/j.ijsolstr.2015.10.022

Liu, Y., Kyriakides, S., Hallai, J.F., "Reeling of Pipe with Lüders Bands." Int’l J. Solids & Structures 72, 11-25, 2015.http://dx.doi.org/10.1016/j.ijsolstr.2015.07.006

Gaitanaros, S. and Kyriakides, S., “On the Effect of Relative Density on the Dynamic Crushing of Open-Cell Foams.” Int’l J. of Impact Engineering 82, 3-13, 2015. http://dx.doi.org/10.1016/j.ijimpeng.2015.03.011

Harrison, B., Liu, Y., Kyriakides, S., “Measurement of Lined Pipe Liner Imperfections and the Effect on Wrinkling and Collapse Under Bending.” Proc., 34rd Int’l Conf. on Ocean, Offshore and Arctic Engineering, St. Johns, NL, Canada, May 31-June 5, 2014, OMAE2015-41228.

Yuan, L. and Kyriakides, S., “Liner Wrinkling and Collapse of Bi-material Pipe Under Axial Compression.” Int’l J. Solids & Structures 60-61, 48-59, 2015.http://dx.doi.org/10.1016./j.ijsolstr.2015.01.029

Yuan, L. and Kyriakides, S., “Liner Wrinkling and Collapse of Girth-Welded Bi-Material Pipe Under Bending.” Applied Ocean Research 50, 209-216, 2015. http://dx.doi.org/10.1016/j.apor.2015.01.018

Bechle, N.J. and Kyriakides, S., "Localization in NiTi Tubes Under Bending." Int'l J. Solids & Structures 51, 967-980, 2014. " http://dx.doi.org/10.1016/j.ijsolstr.2013.11.023

Yuan, L. and Kyriakides, S., "Plastic Bifurcation Buckling of Lined Pipe Under Bending." European J. Mechanics A/Solids 47, 288-297, 2014. http://dx.doi.org/10.1016/j.euromechsol.2014.04.005

Barnes, A.T., Ravi-Chandar, K., Kyriakides, S., Gaitanaros, S., "Dynamic Crushing of Aluminum Foams: Part I-Experiments." Int'l J. Solids & Structures 51, 1631-1645, 2014 "http://dx.doi.org/10.1016/j.ijsolstr.2013.11.019

Gaitanaros, S., Kyriakides, S., "Dynamic Crushing of Aluminum Foams: Part II-Analysis." Int'l J. Solids & Structures 51, 1631-1645, 2014.http://dx.doi.org/10.1016/j.ijsolstr.2013.11.020

Yuan, L. and Kyriakides, S., "Liner Wrinkling and Collapse of Bi-material Pipe Under Bending." Int'l J. Solids & Structures 51, 1646-1661, 2014. http://dx.doi.org/10.1016/j.ijsolstr.2013.10.026

Farhat, C., Wang, K., Main, A, Kyriakides, S., Lee, L.-H., Ravi-Chandar, K., Belytscho, T., “Dynamic implosion of Underwater Cylindrical Shells: Experiments and Computations." Int’l J. Solids & Structures 50, 2943-2961, 2013. http://dx.doi.org/10.1016/j.ijsolstr.2013.05.006

Haltom, S.S., Kyriakides, S., Ravi-Chandar, K., “Ductile Failure Under Combined Shear and Tension.” Int’l J. Solids & Structures 40, 1507-1522, 2013. http://dx.doi.org/10.1016/j.ijsolstr.2012.12.009

Jang, W.-Y. and Kyriakides, S., “On the Buckling and Crushing of Expanded Honeycomb.”  Int’l J. Mechanical Sciences (accepted).http://dx.doi.org/10.1016/j.ijmecsci.2014.02.008

Hallai, J. and Kyriakides, S., “Underlying Material Response for Lüders Like Instabilities.” Int’l J. Plasticity 47, 1-12, 2013. http://dx.doi.org/10.1016/j.ijplas.2012.12.002

Gaitanaros, S., Kyriakides, S. and Karynik A.M., “On the Crushing Response of Random Open-cell Foams." Int’l J. Solids & Structures 49, 2733-2743, 2012. http://dx.doi.org/10.1016/j.ijsolstr.2012.03.003

Tardif, N. and Kyriakides, S. “Determination of anisotropy and material hardening for aluminum sheet metal." Int’l J. Solids & Structures 49, 3496-3506, 2012. http://dx.doi.org/10.1016/j.ijsolstr.2012.01.011

Limam, A., Lee, L.-H., Corona, E. and Kyriakides, S. “On the Collapse of Dented Tubes Under Combined Bending and Internal Pressure.” Int’l J. Mechanical Sciences 55, 1-12, 2012 (http://dx.doi.org/10.1016/j.ijmecsci.2011.10.005).

Hallai, J. and Kyriakides, S., "On the Effect of Lüders Bands on the Bending of Steel Tubes: Part I Experiments." Int'l J. Solids & Structures 48, 3275-3284, 2011. http://dx.doi.org/10.1016/j.ijsolstr.2011.06.024

Hallai, J. and Kyriakides, S., "On the Effect of Lüders Bands on the Bending of Steel Tubes: Part II Analysis." Int'l J. Solids & Structures 48, 3285-3298, 2011. http://dx.doi.org/10.1016/j.ijsolstr.2011.07.012

Jiao, R. and Kyriakides, S., "Ratcheting and Wrinkling of Tubes due to Axial Cycling under Internal Pressure: Part I Experiments." Int'l J. Solids & Structures 48, 2814-2826, 2011. http://dx.doi.org/10.1016/j.ijsolstr.2011.05.027 (Supplemental Material and Data)

Jiao, R. and Kyriakides, S., "Ratcheting and Wrinkling of Tubes due to Axial Cycling under Internal Pressure: Part II Analysis." Int'l J. Solids & Structures 48, 2827-2836, 2011. http://dx.doi.org/10.1016/j.ijsolstr.2011.05.026

Korkolis, Y.P. and Kyriakides, S., "Hydroforming of Anisotropic Aluminum Tubes: Part I Experiments." Int'l J. Mechanical Sciences 53, 75-82, 2011. http://dx.doi.org/10.1016/j.ijmecsci.2010.11.003

Korkolis, Y.P. and Kyriakides, S., "Hydroforming of Anisotropic Aluminum Tubes: Part II Analysis." Int'l J. Mechanical Sciences 53, 83-90, 2011. http://dx.doi.org/10.1016/j.ijmecsci.2010.11.004

Wilbert, A., Jang, W.-Y., Kyriakides, S., Floccari, J.F., "Buckling and Progressive Crushing of Laterally Loaded Honeycomb." Int'l J. Solids & Structures 48, 803-816, 2011. http://dx.doi.org/10.1016/j.ijsolstr.2010.11.014

Limam, A., Lee, L.-H., and Kyriakides, S., "Effect of Local Imperfections on the Collapse of Tubes Under Bending and Internal Pressure." Proceedings, 8th Biennial International Pipeline Conference, September 27-October 1, 2010, Calgary, Alberta, Canada, IPC2010-31594. http://dx.doi.org/10.1115/IPC2010-31594

Hallai, J. and Kyriakides, S., "Effect of Lüders Bands on the Bending Capacity of Steel Tubes." Proceedings, Offshore Mechanics and Arctic Engineering Conference, Shanghai, China, June 6-11, 2010, OMAE2010-20982. http://dx.doi.org/10.1115/OMAE2010-20982

Giagmouris, Y., Kyriakides, S., Korkolis, Y.P., and Lee, L.-H., "On the Localization and Failure in Aluminum Shells due to Crushing Induced Bending and Tension." Int'l J. Solids & Structures 47, 2680-2692, 2010. http://dx.doi.org/10.1016/j.ijsolstr.2010.05.023

Korkolis, Y.P., Kyriakides, S., Giagmouris, Y., and Lee, L.-H., "Constitutive Modeling and Rupture Predictions of Al-6061-T6 Tubes Under Biaxial Loading Paths." ASME J. Applied Mechanics 77:5, 064501, 1-5, 2010. http://dx.doi.org/10.1115/1.4001940

Jang, W.-Y., Kyriakides, S. and Kraynik, A.M., "On the Compressive Strength of Open-Cell Metal Foams with Kelvin and Random Cell Structures." Int'l J. Solids & Structures 47, 2872-2883, 2010. http://dx.doi.org/10.1016/j.ijsolstr.2010.06.014

Korkolis, Y.P. and Kyriakides, S., "Path Dependent Failure of Inflated Aluminum Tubes." Int'l J. Plasticity 25, 2059-2080, 2009. http://dx.doi.org/10.1016/j.ijplas.2008.12.016

Jiao, R. and Kyriakides, S., "Wrinkling of Tubes Under Axial Cycling." ASME J. Applied Mechanics 77:3, 031012: 1-11, 2010. http://dx.doi.org/10.1115/1.4000431 (Supplemental Material and Data)

Jiao, R. and Kyriakides, S., "Ratcheting, Wrinkling and Collapse of Tubes Under Axial Cycling." Int'l J. Solids & Structures 46, 2856-2870, 2009. http://dx.doi.org/10.1016/j.ijsolstr.2009.03.018 (Supplemental Material and Data)

Limam, A., Lee, L.-H., Corona, E. and Kyriakides, S. "Inelastic Wrinkling and Collapse of Tubes Under Combined Bending and Internal Pressure." Int'l J. Mechanical Sciences 52, 637-647, 2010. http://dx.doi.org/10.1016/j.ijmecsci.2009.06.008

Jang, W.-Y. and Kyriakides, S., "On the Crushing of Aluminum Open-Cell Foams: Part I Experiments." Int'l J. Solids & Structures 46, 617-634, 2009 http://dx.doi.org/10.1016/j.ijsolstr.2008.09.008

Jang, W.-Y. and Kyriakides, S., "On the Crushing of Aluminum Open-Cell Foams: Part II Analysis." Int'l J. Solids & Structures 46, 635-650, 2009 http://dx.doi.org/10.1016/j.ijsolstr.2008.10.016

Sakakibara, N., Kyriakides, S. and Corona, E. "Collapse of Partially Corroded or Worn Pipe Under External Pressure." Int'l J. Mechanical Sciences 50, 1586-1697, 2008. http://dx.doi.org/10.1016/j.ijmecsci.2008.10.006

Limam, A., Lee, L.-H., Corona, E. and Kyriakides, S. "Plastic Buckling and Collpase of Tubes Under Bending and Internal Pressure." Proceedings Offshore Mechanics and Arctic Engineering Conference, Estori, Portugal, June 2008, OMAE2008-57986. (PDF)

Lee, L.-H, Kyriakides, S. and Netto, T.A., "Enhanced Design Criteria for Offshore Pipeline Buckle Arrestors." Proceedings Offshore Mechanics and Arctic Engineering Conference, Estori, Portugal, June 2008, OMAE2008-57985. http://dx.doi.org/10.1115/OMAE2008-57985

Kyriakides, S., Ok, A. and Corona, E., "Localization and Propagation of Curvature Under Pure Bending in Steel Tubes with Lüders Bands." Int'l J. Solids & Structures 45, 3074-3087, 2008. http://dx.doi.org/10.1016/j.ijsolstr.2008.01.013

Lee, L.-H., Kyriakides, S. and Netto, T.A., "Integral Buckle Arrestors for Offshore Pipelines: Enhanced Design Criteria." Int'l J. Mechanical Sciences, 50, 1058-1064, 2008, http://dx.doi.org/10.1016/j.ijmecsci.2008.02.008

Korkolis, Y. P., and Kyriakides, S., "Inflation and Burst of Anisotropic Aluminum Tubes, Part II: An advanced yield function including deformation-induced anisotropy," Int'l J. Plasticity, 24 1625-1637, 2008. http://dx.doi.org/10.1016/j.ijplas.2008.02.011

Jang, W.-Y., Kraynik, A. M., and Kyriakides, S., "On the Microstructure of Open-Cell Foams and its effect on Elastic Properties," Int'l J. Solids & Structures, 45, 1845-1875, 2008. http://dx.doi.org/10.1016/j.ijsolstr.2007.10.008

Da Silva, Andre and Kyriakides, Stelios, "Compressive Response and Failure of Balsa Wood." Int'l J. Solids & Structures 44, 8685-8717, 2007. http://dx.doi.org/10.1016/j.ijsolstr.2007.07.003

Korkolis, Y. P., and Kyriakides, S., "Inflation and Burst of Anisotropic Aluminum Tubes for Hydroforming Applications," Int'l J. Plasticity, 24, 509-543, 2008. http://dx.doi.org/10.1016/j.ijplas.2007.07.010

Kyriakides, S., Herynk, M.D., and Yun, H.D., "Optimization of UOE Pipe Manufacturing Process for Improved Collapse Performance Under External Pressure." IPC 2006-10614, Proceeding of the International Pipeline Conference, Calgary, Canada, September 25-29, 2006. http://dx.doi.org/10.1016/j.ijmecsci.2006.10.001

Herynk, M.D., Kyriakides, S., Onoufriou, A., and Yun, H.D., "Effects of the UOE/UOC pipe manufacturing processes on pipe collapse pressure." Int'l J. Mechanical Sciences 49, 533-553, 2007. http://dx.doi.org/10.1016/j.ijmecsci.2006.10.001

Corona, E., Lee, L.-H. and Kyriakides, S., "Yield anisotropy effects on buckling of circular tubes under bending." Int'l J. Solids & Structures 43, 7099-7118, 2006. http://dx.doi.org/10.1016/j.ijsolstr.2006.03.005

Bardi, F.C. and Kyriakides, S., "Plastic Buckling of Circular Tubes Under Axial Compression: Part I Experiments." Int'l J. Mechanical Sciences 48, 830-841, 2006. http://dx.doi.org/10.1016/j.ijmecsci.2006.03.005

Bardi, F.C., Kyriakides, S. and Yun, H.D., "Plastic Buckling of Circular Tubes Under Axial Compression: Part II Analysis." Int'l J. Mechanical Sciences 48, 842-854, 2006. http://dx.doi.org/10.1016/j.ijmecsci.2006.03.002

Paquette, J.A. and Kyriakides, S., "Plastic Buckling of Tubes Under Combined Axial Compression and Internal Pressure." Int'l J. Mechanical Sciences 48, 855-867, 2006. http://dx.doi.org/10.1016/j.ijmecsci.2006.03.003

Gong, L. and Kyriakides, S. "On the Crushing Stress of Open Cell Foams." ASME J. Applied Mechanics 73:5, 807-814, 2006. http://dx.doi.org/10.1115/1.2047608

Kyriakides, S. and Lee, L.-H., "Buckle Propagation in Confined Steel Tubes." Int'l J. Mechanical Sciences 47:4-5, 603-620, 2005. http://dx.doi.org/10.1016/j.ijmecsci.2004.11.009

Gong, L., Kyriakides, S. and Triantafyllidis, N. "On the Stability of Kelvin Cell Foams Under Compressive Loads." J. Mechanics and Physics of Solids 53, 771-794, 2005. http://dx.doi.org/10.1016/j.jmps.2004.10.007

Kyriakides S., Bardi, F.C. and Paquette, J.A., "Wrinkling of Circular Tubes Under Axial Compression: Effect of Anisotropy." ASME J. Applied Mechanics 72, 301-305, 2005. http://dx.doi.org/10.1115/1.1839590

Gong, L., Jang, W.-Y and Kyriakides S., "Compressive Response of Open-Cell Foams. Part I: Morphology and Elastic Properties." Int'l Journal of Solids & Structures 42, 1355-1379, 2005 http://dx.doi.org/10.1016/j.ijsolstr.2004.07.023

Gong, L., and Kyriakides S., "Compressive Response of Open-Cell Foams. Part II: Initiation and Evolution of Crushing." Int'l Journal of Solids & Structures 42:5-6, 1381-1399, 2005 http://dx.doi.org/10.1016/j.ijsolstr.2004.07.024

Kyriakides, S. and Netto, T.A., "On the Dynamic Propagation and Arrest of Buckles in Pipe-in-Pipe Systems." Int'l Journal of Solids & Structures 41, 5463-5482, 2004. http://dx.doi.org/10.1016/j.ijsolstr.2004.04.035

Gong, L., and Kyriakides S., "On the Crushing Response of Open Cell Foams." Proc. ICTAM 04, August 2004, Warsaw, Poland, ISBN 83-89687-01-1. http://dx.doi.org/10.1115/1.2047608

Lee, L.-H. and Kyriakides, S., "On the Arresting Efficiency of Slip-On Buckle Arrestors for Offshore Pipelines." Int'l J. Mechanical Sciences 46, 1035-1055, 2004 http://dx.doi.org/10.1016/j.ijmecsci.2004.07.009

Aguirre, F., Kyriakides, S. and Yun, H.D., "Bending of Steel Pipes with Lüders Bands." Int'l J. Plasticity 20:7, 1199-1225, 2004. http://dx.doi.org/10.1016/j.ijplas.2003.05.001

Kyriakides, S., Corona, E. and Miller, J.E., "Effect of Yield Surface Evolution on Bending Induced Cross Sectional Deformation of Thin-Walled Sections." Int'l J. Plasticity 20, 607-618, 2004. http://dx.doi.org/10.1016/S0749-6419(03)00075-5

Miller, J.E. and Kyriakides, S., "Three-Dimensional Effects of the Bend-Stretch Forming of Aluminum Tubes." Int'l J. Mechanical Sciences 45:1, 115-140, 2003. http://dx.doi.org/10.1016/S0020-7403(03)00036-5

Bardi, F.C., Yun, H. and Kyriakides, S., "On the Axisymmetric Progressive Crushing of Circular Tubes in Compression." Int'l Journal of Solids & Structures 40, 3137-3155, 2003. http://dx.doi.org/10.1016/S0020-7683(03)00111-2

Kyriakides, S., "Buckle Propagation in Pipe-in-Pipe Systems. Part I Experiments." Int'l Journal of Solids & Structures 39:2, 351-366, 2002. http://dx.doi.org/10.1016/S0020-7683(01)00163-9

Kyriakides, S. and Vogler, T.J. "Buckle Propagation in Pipe-in-Pipe Systems. Part II Analysis." Int'l Journal of Solids & Structures 39:2, 367-392, 2002. http://dx.doi.org/10.1016/S0020-7683(01)00164-0

Olso, E. and Kyriakides, S., "Internal Ring Buckle Arrestors for Pipe-in-Pipe Systems." Int'l Journal of Nonlinear Mechanics 38:2, 267-284, 2003. http://dx.doi.org/10.1016/S0020-7462(01)00112-3

Kyriakides, S., "Efficiency Limits for Slip-On Type Buckle Arrestors for Offshore Pipelines." ASCE Journal Engineering Mechanics 128:1, 102-111, 2002. http://dx.doi.org/10.1061/(ASCE)0733-9399(2002)128:1(102)

Kyriakides, S. and Miller, J.E., "On the Propagation of Lüders Bands in Steel Strips." ASME J. Applied Mechanics 67, 645-654, 2000. http://dx.doi.org/10.1115/1.1328348

Corona, E. and Kyriakides, S., "Asymmetric Collapse Modes of Pipes Under Combined Bending and External Pressure." ASCE J. Engineering Mechanics 126:12, 1232-1239, 2000. http://dx.doi.org/10.1061/(ASCE)0733-9399(2000)126:12(1232)

Vogler, T.J. and Kyriakides, S., "On the Initiation and Growth of Kink Bands in Fiber Composites: Part I Experiments." Int'l J. Solids & Structures 38:15, 2639-2651, 2001. http://dx.doi.org/10.1016/S0020-7683(00)00174-8

Vogler, T.J., Hsu, S.-Y. and Kyriakides, S., "On the Initiation and Growth of Kink Bands in Fiber Composites: Part II Analysis." Int'l J. Solids & Structures 38:15, 2653-2682, 2001. http://dx.doi.org/10.1016/S0020-7683(00)00175-X

Miller, J.E., Kyriakides, S. and Bastard, A.H. "On Bend-Stretch Forming of Aluminum Extruded Tubes: Part I Experiments." Int'l J. Mechanical Sciences 43, 1283-1317, 2001. http://dx.doi.org/10.1016/S0020-7403(00)00039-4 (see movie of bend-stretch-pressure forming facility)

Miller, J.E., Kyriakides, S. and Corona, E. "On Bend-Stretch Forming of Aluminum Extruded Tubes: Part II Analysis." Int'l J. Mechanical Sciences 43, 1319-1338, 2001. http://dx.doi.org/10.1016/S0020-7403(00)00040-0

Kyriakides, S. and Netto, T. A. "On the Dynamics of Propagating Buckles in Pipelines." Int'l Journal of Solids & Structures 37:46-47, 6843-6867, 2000. http://dx.doi.org/10.1016/S0020-7683(99)00317-0

Vogler, T.J , Hsu, S.-Y. and Kyriakides, S. "Composite Failure Under Combined Compression and Shear." Int'l J. Solids & Structures 37:12, 1765-1791, 2000. http://dx.doi.org/10.1016/S0020-7683(98)00323-0

Netto, T.A. and Kyriakides, S., "Dynamic Performance of Integral Buckle Arrestors for Offshore Pipelines. Part I Experiments." Int'l Journal of Mechanical Sciences 42:7, 1405-1423, 2000. http://dx.doi.org/10.1016/S0020-7403(99)00052-1

Netto, T.A. and Kyriakides, S., "Dynamic Performance of Integral Buckle Arrestors for Offshore Pipelines. Part II Analysis." Int'l Journal of Mechanical Sciences 42:7, 1425-1452, 2000. http://dx.doi.org/10.1016/S0020-7403(99)00053-3

Netto, T.A., Kyriakides, S. and Ouyang, X. "On the Initiation and Propagation of Buckles on a Beam on a Nonlinear Foundation." ASME J. Applied Mechanics 66:2, 418-426, 1999. http://dx.doi.org/10.1115/1.2791065

Vogler, T.J. and Kyriakides, S. "Inelastic Behavior of an AS4/PEEK Composite Under Combined Transverse Compression and Shear: Part I Experiments." Int'l J. Plasticity 15, 783-806, 1999. http://dx.doi.org/10.1016/S0749-6419(99)00011-X

Hsu, S.-Y., Vogler, T.J. and Kyriakides, S. "Inelastic Behavior of an AS4/PEEK Composite Under Combined Transverse Compression and Shear: Part II Modeling." Int'l J. Plasticity 15, 807-836, 1999. http://dx.doi.org/10.1016/S0749-6419(99)00012-1

Papka, S.D. and Kyriakides, S., "In-Plane Biaxial Crushing of Honeycombs: Part I Experiments." Int'l Journal of Solids & Structures 36:29, 4367-4396, 1999. http://dx.doi.org/10.1016/S0020-7683(98)00224-8

Papka, S.D. and Kyriakides, S., "In-Plane Biaxial Crushing of Honeycombs: Part II Analysis." Int'l Journal of Solids & Structures 36:29, 4397-4423, 1999. http://dx.doi.org/10.1016/S0020-7683(98)00225-X

Vogler, T.J and Kyriakides, S., "On the Axial Propagation of Kink Bands in Fiber Composites. Part I Experiments." Int'l Journal of Solids & Structures 36, 557-574, 1999. http://dx.doi.org/10.1016/S0020-7683(98)00029-8

Hsu, S.-Y., Vogler, T.J and Kyriakides, S., "On the Axial Propagation of Kink Bands in Fiber Composites. Part II Analysis." Int'l Journal of Solids & Structures 36, 575-595, 1999. http://dx.doi.org/10.1016/S0020-7683(98)00030-4

Shaw, J.A and Kyriakides S. "Initiation and Propagation of Localized Deformation in the Pseudoelastic Response of NiTi." Proceedings, ASCE Engineering Mechanics Conference, San Diego, CA, March 1998. http://dx.doi.org/10.1117/12.316850

Vogler, T. J. and Kyriakides, S., "On the Effect of Loading Rate on the Compressive Strength of an AS4/PEEK Composite." ASME Journal of Applied Mechanics 65:4, 1056-1058, 1998. http://dx.doi.org/10.1115/1.2791900

Papka, S.D. and Kyriakides, S., "Experiments and Full-Scale Numerical Simulations of In-Plane Crushing of a Honeycomb." Acta Materialia 46:8, 2765-2776, 1998. http://dx.doi.org/10.1016/S1359-6454(97)00453-9

Hsu, S.-Y., Vogler, T. J. and Kyriakides, S., "Compressive Strength Predictions for Fiber Composites." ASME Journal of Applied Mechanics 65:1, 7-16, 1998. http://dx.doi.org/10.1115/1.2789050

Shaw, J. A. and Kyriakides, S., "Initiation and Propagation of Localized Deformation in Elasto-Plastic Strips Under Uniaxial Tension." Int'l Journal of Plasticity 13:10, 809-835, 1998. http://dx.doi.org/10.1016/S0749-6419(97)00062-4

Kyriakides, S., Park, T.-D. and Netto, T.A., "On the Design of Integral Buckle Arrestors for Offshore Pipelines." Proc. BOSS'97 Ed. J.H. Vugts, Vol. 1, 277-289, Pergamon (Elsevier Sciences) 1997. Also, Applied Ocean Research 20, 95-114, 1998. http://dx.doi.org/10.1016/S0141-1187(98)00007-8

Papka, S.D. and Kyriakides, S., "In-plane Crushing of a Polycarbonate Honeycomb." Int'l Journal of Solids & Structures 35, 239-267, 1998. http://dx.doi.org/10.1016/S0020-7683(97)00062-0 (see movie 1 - uniaxial) (see movie 2- uniaxial) (see movie 3 - biaxial) (see movie 4 - biaxial)

Vogler, T.J. and Kyriakides, S., "Initiation and Axial Propagation of Kink Bands in Fiber Composites." Acta Materialia 45:6, 2443-2454, 1997. http://dx.doi.org/10.1016/S1359-6454(96)00350-3

Kyriakides, S. and Ruff, A. E., "Aspects of Failure and Postfailure of Fiber Composites in Compression." Journal of Composite Materials 31:20, 2000-2037, 1997. http://dx.doi.org/10.1177/002199839703101604

Park, T.-D. and Kyriakides, S., "On the Design of Integral Buckle Arrestors for Offshore Pipelines." Int'l Journal of Mechanical Sciences 39:6, 643-669, 1997. http://dx.doi.org/10.1016/S0020-7403(96)00074-4

Shaw, J.A. and Kyriakides, S., "On the Nucleation and Propagation of Phase Transformation Fronts in a NiTi Alloy." Acta Materialia 45:2, 683-700, 1997. http://dx.doi.org/10.1016/S1359-6454(96)00189-9

Power, T.L. and Kyriakides, S., "Circumferential Stiffeners as Buckle Arrestors in Long Panels." Int'l Journal of Solids and Structures 33, No. 13, 1837-1851, 1996. http://dx.doi.org/10.1016/0020-7683(95)00133-6

Shaw, J.A. and Kyriakides, S., "Thermomechanical Aspects of NiTi." Journal of the Mechanics and Physics of Solids 43, 1243-1281, 1995. http://dx.doi.org/10.1016/0022-5096(95)00024-D

Park, T.-D. and Kyriakides, S., "On the Collapse of Dented Cylinders Under External Pressure." Int'l Journal of Mechanical Sciences 38, No. 5, 557-578, 1996. http://dx.doi.org/10.1016/0020-7403(95)00065-8

Corona, E., Hassan, T. and Kyriakides, S., "On the Performance of Kinematic Hardening Rules in Predicting a Class of Biaxial Ratcheting Histories." Int'l Journal of Plasticity 12, No. 1, 117-145, 1996. http://dx.doi.org/10.1016/S0749-6419(95)00047-X


Books/Proceedings Edited:

Kyriakides, S. and Triantafyllidis, N., Guest Editors, "Material Instabilities and the Effect of Microstructure," Special Volume, International Journal of Solids and Structures, dedicated to the proceedings of an IUTAM Symposium held on May 7-11, 2001, Austin, TX (32 papers), Vol. 39:13-14, pp. 3311-3929.

De Borst, R., Kyriakides, S. and van Baten T.J., Guest Editors,"Stability and Vibration in Thin-Walled Structures."Special Volume, International Journal of Nonlinear Mechanics, Honoring Professor Johann Arbocz (28 papers), Vol. 37:4-5,pp. 571-1002, 2002.


Proceedings Papers:

Liu, Y. and Kyriakides, S., "Effect of Geometric and Material Discontinuities on the Reeling of Pipes." Proc., 33rd Int'l Conf. on Ocean, Offshore and Arctic Engineering, San Francisco, California, June 8-13, 2014, OMAE2014-24474.

Yuan, L. and Kyriakides, S., "Wrinkling and Collapse of Girth-Welded Lined Pipe Under Bending." Proc., 33rd Int'l Conf. on Ocean, Offshore and Arctic Engineering, San Francisco, California, June 8-13, 2014, OMAE2014-23577.

Yuan, L. and Kyriakides, S., “Wrinking Failure of Lined Pipe Under Bending.” Proc., 32nd Int’l Conf. on Ocean, Offshore and Arctic Engineering, Nantes, France, June 9-14, 2013, OMAE2013-11139.

Reichel, T., Pavlyk, V., Beissel, J., Averov, I., Kyriakides, S., J,, “Ion the Collapse Pressure of Impanded Large Diameter Pipe (JCO-C)." Proceedings, 9th Biennial International Pipeline Conference, September 24-28, 2012, Calgary, Alberta, Canada, IPC2012-90735.

Bechle, N., Kyriakides, S., "Pure Bending of Pseudoelstic NiTi Tubes." Paper SM09-005 Proceedings, XXIII ICTAM, August 2012, Beijing, China.

Jang, W.-Y., Kyriakides, S., "Buckling and Crushing of Expanded Honeycomb." Paper SM14-011 Proceedings, XXIII ICTAM, August 2012, Beijing, China.

Gaitanaros, S., Kyriakides, S. and Kraynik, A.M., "Numerical Modeling of the Crushing Response of Aluminum Open-Cell Random Foams." Paper FS11-004 Proceedings, XXIII ICTAM, August 2012, Beijing, China.

Hallai, J. and Kyriakides, S., “Bending Capacity of Tubes with Lüders Bands: Influence of Geometric and Material Parameters." Proc., 31st  Int’l Conf. on Ocean, Offshore and Arctic Engineering, Rio de Janeiro, Brazil, July 2-6, 2012, OMAE2012-8360.

Jiao, R. and Kyriakides, S., "Ratcheting, Wrinkling and Collapse of Tubes Induced by Axial Cycling under Internal Pressure." Proc., Offshore Mechanics and Arctic Engineering Conference, Rotterdam, The Netherlands, June 18-24, 2011, OMAE2011-49706.

Reichel, T., Pavlyk, V., Beissel, J., Kyriakides, S., Jang, W.-Y., "New Impander Technology for Improved Collapse Resistance of Large Diameter Pipe for Deepwater Applications." Proc., Offshore Technology Conference, May 2-5, 2011, Houston, Texas, OTC21503.

Reichel, T., Pavlyk, V., Beissel, J., Kyriakides, S., Jang, W.-Y., “New Impander Technology for Improved Collapse Resistance of Large Diameter Pipe for Deepwater Applications.” Proc., Offshore Technology Conference, May 2-5, 2011, Houston, Texas, OTC21503.

Limam, A., Lee, L.-H., and Kyriakides, S., “Effect of Local Imperfections on the Collapse of Tubes Under Bending and Internal Pressure.” Proceedings, 8th Biennial International Pipeline Conference, September 27-October 1, 2010, Calgary, Alberta, Canada, IPC2010-31594.

Reichel, T., Pavlyk, V., Beissel, J., Kyriakides, S., Jang, W.-Y., “Improved Collapse Resistance of Large Diameter Pipe for Deepwater Applications using a New Impander Technology.” Proceedings, 8th Biennial International Pipeline Conference, September 27-October 1, 2010, Calgary, Alberta, Canada, IPC2010-31551.

Fryer, M., Tait, P., Kyriakides, S., Timms, C. and DeGeer, D. (2004). The prediction and enhancement of UOE-DSAW collapse resistance for deepwater pipeline. Proc. 5th Biennial International Pipeline Conference, October 4-8, 2004, Calgary, Alberta, Canada, Vol. 3, 1961-1966.

Netto, T.A. and Kyriakides, S., "Dynamic Arrest of Propagating Buckles in Offshore Pipelines." Proc. ICTAM 04, August 2004, Warsaw, Poland, ISBN 83-89687-01-1.

Kyriakides, S. and Netto, T.A. "Dynamic Propagation and Arrest of Buckles in Pipe-In-Pipe Systems." In, Proceedings Offshore Mechanics and Arctic Engineering '02 Conference, Oslo, Norway, June 2002.

Kyriakides, S., "Propagating Instabilities in Materials." In, Materials Science for the 21th Century, Society of Materials Science, Japan, Vol. 1, pp. 316-325, May 2001.

Miller, J.E. and Kyriakides, S., "Stretch Forming of Rectangular Aluminum Tubes for Automotive Applications." In Proceedings of the International Body and Engineering Conference, Detroit, MI October 2-5, 2000.

Netto, T.A. and Kyriakides, S., "Dynamic Performance of Integral Buckle Arrestors for Offshore Pipelines." In, Proceedings Offshore Mechanics and Arctic Engineering '98 Conference, Lisbon, Portugal, July 1998.

Papka, S. D. and Kyriakides, S., "In-plane Crushing of a Polycarbonate Honeycomb." In, Proceedings IUTAM Symposium Material Instabilities in Solids, June 1997, Delft, Ed. R. de Borst and E. van der Giessen, Wiley, Chichester, England, 1998, pp. 159-183.